欧美黄色一级视频,蜜臀久久99精品久久久电影,久久精品99国产精品日本,久久久精品日本一区二区三区

旺鴻達潤滑油
深圳市旺鴻達潤滑油貿易有限公司
電話：0755-29675629
傳真：0755-81472607
手機：13662610386
聯系人：歐陽民
網址：haokan88.com
郵箱：shell2123@126.com
地址：深圳市寶安區龍華街道龍觀東路金龍華廣場二期金龍閣1307室
郵編：518000
美孚潤滑油
殼牌潤滑油
阿吉普潤滑油
克魯勃潤滑油
埃爾夫潤滑油
福斯?jié)櫥? /></a></td> </tr> </table></td> <td align=
道達爾潤滑油
嘉實多潤滑油
倍可潤滑油
加德士潤滑
BP潤滑油
太陽潤滑油
Q8潤滑油
長城潤滑油
昆侖潤滑油
好富頓潤滑油
產品分類
 
產品展示
FUCHS RENOLIN B HVI液壓油詳細說明?。g覽1747次）

RENOLIN B HVI 


 Print
High Performance, High Viscosity index HV Hydraulic Oils

Diagram 

High Performance, High Viscosity index HV Hydraulic Oils

The function of hydraulic oil pumps can often be improved irrespective of the machinery driven because they are isolated from the variables found at the workplace. A major factor in the performance of hydraulic system is the fluid medium. This absorbs a relatively large amount of energy when the pump is started-up because of the high internal resistance of hydraulic oil. Excessive friction also occurs if the oil's viscosity is too low and this leads to wear. Such conditions can cause breakdowns. FUCHS has developed a series of so-called "low friction" oils which reduce energy consumption and wear when hydraulic pumps are started-up. These products also improve reliability and eliminate breakdowns caused by insufficient or excess viscosity, both problems associated with normal HM hydraulic oils.

The RENOLIN B HVI series of oils offer the following advantages:


  • Excellent viscosity-temperature behaviour 
  • Good EP properties and thus protection against wear 
  • Excellent shear stability 
  • Excellent oxidation stability and resistance to ageing 
  • Excellent corrosion protection 
  • Rapid air release and low foaming 
  • Good demulsification characteristics 
  • Good elastomer compatibility

Application:

The RENOLIN B HVI series of oils are not just high grade hydraulic oils but also excellent lubricating oils which can be used for numerous applications.

They are particularly suitable for use in hydraulic equipment operating over a wide temperature range. This means for applications requiring a low start-up viscosity but also a stable protecting lubricating film at high operating temperatures. RENOLIN B HVI series of oils contribute to a rationalization by reducing the variety of hydraulic oils in use.

RENOLIN   B 15 HVI B 32 HVI B 46 HVI  
Hydraulic oil type          
acc. to ISO 6743-41   HV 15 HV 32 HV 46  
acc. to DIN 51 5021   HVLP 15 HVLP 32 HVLP 46  
Characteristics Unit       Test method
Colour   0.5 1 1 ASTM D 1500
Kinematic viscosity          
at 40 °C mm2/s 15 32 46 ASTM D 445
at 100 °C mm2/s 3.8 6.8 8.9 ASTM D 445
Viscosity index   153 180 180 ASTM D 2270
Density at 15 °C kg/l 0.855 0.876 0.87 ASTM D 1298
Flash point, Cleveland open cup °C 180 178 178 ASTM D 92
Pour point °C - 36 - 42 - 33 ASTM D 97
Neutralization number mg KOH/g 0.3 0.3 0.3 ASTM D 974
Saponification number mg KOH/g 0.6 0.6 0.6 ASTM D 94
Oxide ash % mass 0.1 0.1 0.1 ASTM D 482
Water content % mass not traceable not traceable not traceable ASTM D 95
Insolubles % mass not traceable not traceable not traceable DIN 51 592
Demulsification min 15 15 18 DIN 51 599
Air release at 50 °C min 1 2 3 ASTM D 3427
Foaming,          
seq. I ml 10/0 20/0 40/0 ASTM D 892 seq. I-III
seq. II ml 30/0 20/0 20/0 ASTM D 892 seq. I-III
seq. III ml 10/0 60/0 50/0 ASTM D 892 seq. I-III
Copper corrosion degree of corr. 1a-100A24 1a-100A24 1a-100A24 ASTM D 130
Rust prevention   pass A pass A pass A ASTM D 665
Shear stability after 250 cycles, viscosity decrease at 100 °C % 2 5 7 IP 294
Ageing behaviour, increase in neutralization number after 1000 h mg KOH/g < 2 < 2 < 2 ASTM D 943
FZG mechanical gear rig test load stage 12 12 12 DIN 51 354-2
Vickers vane pump test, loss of mass          
on ring mg < 120 < 120 < 120 IP 281
on vanes after 250 h mg < 30 < 30 < 30 IP 281
Effect on SRE-NBR 1 seal material acc. to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours,          
relative volume change % 15 11 0 DIN 53 521 together with DIN 53 505
change in Shore A hardness Shore – 5 – 5 – 5 DIN 53 521 together with DIN 53 505


1 See data table for deviations from the minimum requirements 
上一產品： CASTROL Hyspin ZH-M
下一產品： FUCHS RENOLIN UNISYN CKC齒輪油
Copyright (C) 2010　深圳市旺鴻達潤滑油貿易有限公司　haokan88.com　All Right Reserved
地址：深圳市寶安區龍華街道龍觀東路金龍華廣場二期金龍閣1307室　電話：0755-29675629　傳真：0755-81472607　聯系人：歐陽民
網址：haokan88.com　E-mail：shell2123@126.com　友情鏈接：旺鴻達潤滑油　粵ICP備16127079號