Mobil 1 Synthetic Grease
High performance automotive grease
Product Description
Mobil 1 Synthetic Grease is an NLGI No 2 high-performance automotive grease which combines a synthetic base fluid with a lithium complex soap thickener. The thickener system provides a high dropping point, while additives impart optimum extreme-pressure properties and excellent resistance to water wash, and outstanding protection against rust and corrosion. Mobil 1 Synthetic Grease has excellent structural stability. The synthetic base oil used in Mobil 1 Synthetic Grease gives it excellent performance properties at both high and low temperatures. High structural shear stability coupled with a high performance base oil make Mobil 1 Synthetic an outstanding automotive grease.
Features and Benefits
Mobil 1 Synthetic Grease provides the following advantages and benefits:
| Features |
Advantages and Potential Benefits |
| All-purpose automotive service |
Certified to the NLGI GC-LB specifications for both chassis and wheel bearing lubrication |
| Wide Operating range |
-40 C (- 40 F) to 150 C (302 F) |
| Excellent resistance to rust and corrosion |
Longer life of bearings and chassis lube points |
| Outstanding structural stability |
Ability to provide effective lubrication over extended periods of time |
| Excellent wear protection under heavy loads |
Provides bearing protection while cornering and other conditions where bearings temporarily experience heavy loads. |
| Excellent resistance to water wash |
Withstands the effects of water washout from heavy rain storms or other high water wash events. |
Applications
Mobil 1 Synthetic Grease meets the requirements of the National Lubricating Grease institute (NLGI) performance classification GC-LB. It is recommended for automotive applications at both high and low temperatures. It is particularly suited for applications such as disc brake wheel bearings and ball and steering joints. It will provide outstanding bearing protection under heavy loads at any highway speed, and where moisture or condensation is a factor.
Specification and Approvals
| Mobil 1 Synthetic Grease has the following qualifications |
|
| NLGI GC-LB |
2 |
Typical Properties
| Mobil 1 Synthetic Grease |
|
| Product Number |
53201-0 |
| NLGI Grade |
2 |
| Soap Type |
Lithium Complex |
| Structure |
Smooth; Slight Tack |
| Color |
Red |
| Penetration, ASTM D 217 |
|
| Worked x 60 strokes |
280 |
| Worked x 10,000 strokes |
295 |
| Worked x 100,000 strokes |
305 |
| Dropping Point, oC (oF) |
288 (550) |
| Viscosity of Oil, ASTM D 445 |
|
| cSt at 40oC |
220 |
| cSt at 100oC |
23.8 |
| ISO Viscosity Grade |
220 |
| Timken OK Load, ASTM D 2509, lb |
45 |
| Four-Ball Wear Test, ASTM D 2266, scar Diam, mm |
0.40 |
| Four-Ball EP, ASTM D 2596, Weld Load, kg |
250 |
| Four-Ball EP, Load Wear Index |
45 |
| Corrosion Prevention, ASTM D 1743 |
Pass |
| Emcor/SKF Water Wash Test, IP 220 (modified) |
0.0 |
| Water Washout, ASTM D 1264, 79oC (175oF), wt % |
6 |
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
The Mobil logotype, the Pegasus design and Mobil 1 are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.
Copyright ? 2001-2013 Exxon Mobil Corporation. All rights reserved.
